Professional quality condensor microphone.The HyperX ProCast is a condensor microphone with an XLR-connection, which has been developed for professional use. You'll benefit from more detail in your shots thanks to the gold-plated, large membrane capacitor capsule with cardioid features. The vibration and shock-absorbing mounting as well as the HyperX Shield snap-on clam noise filter together reduce unwanted rolling and popping noises in your recordings. In addition, a 80 Hz high pass filter and a -10 dB CUSHION ensure that you always record exactly the WAS you want to record in different scenarios. The stylish ProCast is suitable for 3/8 inch and 5/8 inch thread and is thus compatible with most of the arms and stands for a streaming or recording setup in a new dimension.Large capacitor for excellent noise suppressionThe design of the ProCast enables better detailed playback in the high-frequency range as compared to electret and dynamic microphones and a better performance in the low-frequency range than in case of smaller membrane capacitors.Cardioid directional characteristic for solo recordingsThe cardioid pick-up characteristic emphasizes the sound in front of the microphone and is therefore perfect for voice-over, streaming, songs, podcasts or other audio recordings from just one source.Professional quality XLR connectionThe ProCast requires a 48 V phantom cable. To start recording, connect it to professional-quality interfaces or pre-amplifiers using an XLR cable.Including removable HyperX-Shield metal pop filterSimply attach the HyperX shield to the supplied shock-absorbing bracket of the ProCast, in order to filter the explosive air shocks, which occur in P-noises.Integrated vibration and shock-proof holderWith the elastic cable suspension you can insulate the microphone and suppress unwanted noises.Fine-tune your audio recordingsThe switchable 80 Hz filter helps to reduce unwanted frequencies in the low frequency range such as rumble and vibrations. Thanks to passive damping, the microphone can also be used at high sound pressure levels.Compatible with most microphone holders and microphone standsThe versatile microphone fits with adapters for 3/8-inch and 5/8-inch sizes and is compatible with most microphone stands and holders.This text is machine translated.