Product Description
1-10V control dimming switch 1-10V for electronic ballast. 1 NO non-potential free 600VA and 1-10V control output 40mA. Stand-by loss only 1 watt. Adjustable dimming speed. With children's room and snooze switch. With button or switch control. For panel mounting. 45mm long, 45mm wide, 33mm deep. Switching in zero crossing for contact protection. Also for controlling LED converters with passive 1-10V interface without auxiliary voltage up to 0.6mA. Above with auxiliary voltage. Switching and control voltage 230V. The latest hybrid technology combines the advantages of wear-free electronic control with high power from special relays. The load is switched on and off with a bistable relay at the output ECG. Switching capacity of fluorescent lamps or LV halogen lamps with EVG 600VA. By using a bistable relay, there is no coil power loss and no heating thereby even when the relay is switched on. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains. Short control commands switch on / off, permanent control changes the brightness up to the maximum value. An interruption of the control changes the dimming direction. The set brightness level remains saved when the device is switched off. In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. The dimming speed can be set with the dim speed rotary switch (only when activated with a button). If light switches cannot be replaced by light switches, the rotary switch can be set to the switch symbol at the right stop: If the closed switch is opened again briefly, then it is dimmed until it is opened again briefly. The dimming direction is changed automatically at the two vertices. In addition, the direction can be changed by briefly opening the switch twice. With children's room switch (only for activation with button): When switched on with longer button activation, the light is switched on at the lowest brightness after approx. 1 second and, as long as it is still being scanned, slowly dimmed up without changing the last brightness level saved. With snooze function (only for activation with button): By a double pulse, the lighting is dimmed from the current dimming position up to the minimum brightness and switched off. The max. dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can therefore be shortened accordingly. By means of short buttons, you can switch off at any time during the dimming process. A long button during the dimming process dims up and ends the snooze function.This text is machine translated.
Eltako 61100800 DIN-rail dimmer Blue
1-10V control dimming switch 1-10V for electronic ballast. 1 NO non-potential free 600VA and 1-10V control output 40mA. Stand-by loss only 1 watt. Adjustable dimming speed. With children's room and snooze switch. With button or switch control. For panel mounting. 45mm long, 45mm wide, 33mm deep. Switching in zero crossing for contact protection. Also for controlling LED converters with passive 1-10V interface without auxiliary voltage up to 0.6mA. Above with auxiliary voltage. Switching and control voltage 230V. The latest hybrid technology combines the advantages of wear-free electronic control with high power from special relays. The load is switched on and off with a bistable relay at the output ECG. Switching capacity of fluorescent lamps or LV halogen lamps with EVG 600VA. By using a bistable relay, there is no coil power loss and no heating thereby even when the relay is switched on. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains. Short control commands switch on / off, permanent control changes the brightness up to the maximum value. An interruption of the control changes the dimming direction. The set brightness level remains saved when the device is switched off. In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. The dimming speed can be set with the dim speed rotary switch (only when activated with a button). If light switches cannot be replaced by light switches, the rotary switch can be set to the switch symbol at the right stop: If the closed switch is opened again briefly, then it is dimmed until it is opened again briefly. The dimming direction is changed automatically at the two vertices. In addition, the direction can be changed by briefly opening the switch twice. With children's room switch (only for activation with button): When switched on with longer button activation, the light is switched on at the lowest brightness after approx. 1 second and, as long as it is still being scanned, slowly dimmed up without changing the last brightness level saved. With snooze function (only for activation with button): By a double pulse, the lighting is dimmed from the current dimming position up to the minimum brightness and switched off. The max. dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can therefore be shortened accordingly. By means of short buttons, you can switch off at any time during the dimming process. A long button during the dimming process dims up and ends the snooze function.This text is machine translated.
Related Products
129,99 €
Conrad Electronic International
174,99 €
200,00 €
Conrad Electronic International
139,99 €
Conrad Electronic International
55,99 €
Conrad Electronic International
69,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.