Product Description
Surge current switching relay noiseless with 2 channels, 400W. 2 Solid-State relays are not potential-free. Bidirectional. Stand-by loss only 0.1 watt. Connection to the Eltako RS485 bus. Cross-wiring bus and power supply with jumper. If both relays of the FSR14 are switched on, 0.4W is required. The nominal switching power of 400W is valid for one contact and also as the sum of both contacts. The parallel connection of several devices for increased power is permitted. From production week 12/17 with automatic electronic overtemperature shut-off. If the load is less than 1W, a BLE must be connected in parallel to the load. If the supply voltage fails, it is switched off in a defined way. The channels can be taught in independantly of each other as A SINGLE AND/or SINGLE channel. Scene control: With one of the four control signals of a button programd as scene button with double rocker, several channels of one or more FSR14SSR can be switched on or off for each scene. Central commands on the PC are sent with the building radio visualization and control software GFVS. To do this, teach in one or more FSR14SSR on the PC. The rotary switches are used to teach in the buttons and, if necessary, to test the 2 channels. For normal operation, the middle and lower rotary switches are then set to AUTO. With the upper rotary switch, the EW time (0-120 seconds) for relays or the RV time (0-120 minutes) for surge current switches may be set for all channels. If radio motion brightness sensors FBH (master) and / or FBH (slave) are taught in, the upper rotary switch, for each channel separately, is used to determine the switching threshold at which the lighting switches on or off. Settings of the upper rotary switch according to the operating instructions. If FAH60 wireless brightness sensors are taught in, the upper rotary switch, separated for each channel, determines the switching threshold at which the lighting switches on or off depending on the brightness (from approx. 0 lux in position 0 to approx. 50lux in position 120). A hysteresis of approx. 300lux between switching on and off is fixed Âeingestellt. An additional RV time set is not observed. Only one FBH (master) or FAH can be taught in per channel. However, a FBH (master) or FAH can be taught in to several channels.This text is machine translated.
FSR14SSR Eltako RS485 Actuator 2-channel DIN rail
Surge current switching relay noiseless with 2 channels, 400W. 2 Solid-State relays are not potential-free. Bidirectional. Stand-by loss only 0.1 watt. Connection to the Eltako RS485 bus. Cross-wiring bus and power supply with jumper. If both relays of the FSR14 are switched on, 0.4W is required. The nominal switching power of 400W is valid for one contact and also as the sum of both contacts. The parallel connection of several devices for increased power is permitted. From production week 12/17 with automatic electronic overtemperature shut-off. If the load is less than 1W, a BLE must be connected in parallel to the load. If the supply voltage fails, it is switched off in a defined way. The channels can be taught in independantly of each other as A SINGLE AND/or SINGLE channel. Scene control: With one of the four control signals of a button programd as scene button with double rocker, several channels of one or more FSR14SSR can be switched on or off for each scene. Central commands on the PC are sent with the building radio visualization and control software GFVS. To do this, teach in one or more FSR14SSR on the PC. The rotary switches are used to teach in the buttons and, if necessary, to test the 2 channels. For normal operation, the middle and lower rotary switches are then set to AUTO. With the upper rotary switch, the EW time (0-120 seconds) for relays or the RV time (0-120 minutes) for surge current switches may be set for all channels. If radio motion brightness sensors FBH (master) and / or FBH (slave) are taught in, the upper rotary switch, for each channel separately, is used to determine the switching threshold at which the lighting switches on or off. Settings of the upper rotary switch according to the operating instructions. If FAH60 wireless brightness sensors are taught in, the upper rotary switch, separated for each channel, determines the switching threshold at which the lighting switches on or off depending on the brightness (from approx. 0 lux in position 0 to approx. 50lux in position 120). A hysteresis of approx. 300lux between switching on and off is fixed Âeingestellt. An additional RV time set is not observed. Only one FBH (master) or FAH can be taught in per channel. However, a FBH (master) or FAH can be taught in to several channels.This text is machine translated.
Related Products
71,99 €
Conrad Electronic International
57,99 €
Conrad Electronic International
61,99 €
Conrad Electronic International
63,99 €
Conrad Electronic International
59,99 €
Conrad Electronic International
57,99 €
Conrad Electronic International
57,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.