FKLD61 Eltako Wireless Dimmer actuator 1-channel Flush mount Switching capacity (max.) 30 W Max. range (open field) 30
114,99 €
Product Description
DC constant power source for LEDs up to 1000mA or 30 watts. Standby loss of only 0.3 watts. Minimum brightness and dimming speed can be set. With children's room and snooze switch. Additionally with light-setting control via PC or with radio buttons. Encrypted radio, bi-directional radio and repeater function can be activated. For panel mounting. 45mm long, 45mm wide, 33mm deep. The nominal output current can be set with a jumper on the circuit board: No connection: 350mA, right aligned (pin 2-3 connected): 700mA, left aligned (pin 1-2 connected): 1000mA. Factory setting 700mA. The input voltage range ranges from 12V DC to a maximum of 36V DC. The input voltage must be selected above the sum of the LED voltage at the output in order for the current control to work. This difference must be at least 6 volts. The total output current x output voltage must not exceed 30 watts. An impulse-proof DC power supply is required, which supplies the required voltage and current of the LED lamp(s). Universal control voltage 8..230V UC, electrically isolated from the supply and switching voltage. The set brightness level remains stored when the device is switched off (memory). In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. Automatic electronic overload protection and over-temperature switch-off. From week 11/14, encrypted sensors can be trained. Bidirectional radio and/or a repeater function can be switched on. The upper %lamp rotary switch can be used to set the minimum brightness (fully dimmed). In the LRN position, up to 35 radio buttons are assigned, one or more of them central control buttons. The dimming speed can be set with the lower DIM speed rotary switch. In addition to the radio control input via an internal antenna, this dimmer switch can also be locally controlled as a universal switch using a conventional universal voltage control button, which may be installed in front of it. This means that the dimming direction is changed by interrupting the control. Short control commands switch on/off. The radio buttons can be programd either as direction buttons or as universal buttons. The LED accompanies the teach-in process according to the operating instructions and indicates radio control commands during operation by briefly flashing.This text is machine translated.
FKLD61 Eltako Wireless Dimmer actuator 1-channel Flush mount Switching capacity (max.) 30 W Max. range (open field) 30
DC constant power source for LEDs up to 1000mA or 30 watts. Standby loss of only 0.3 watts. Minimum brightness and dimming speed can be set. With children's room and snooze switch. Additionally with light-setting control via PC or with radio buttons. Encrypted radio, bi-directional radio and repeater function can be activated. For panel mounting. 45mm long, 45mm wide, 33mm deep. The nominal output current can be set with a jumper on the circuit board: No connection: 350mA, right aligned (pin 2-3 connected): 700mA, left aligned (pin 1-2 connected): 1000mA. Factory setting 700mA. The input voltage range ranges from 12V DC to a maximum of 36V DC. The input voltage must be selected above the sum of the LED voltage at the output in order for the current control to work. This difference must be at least 6 volts. The total output current x output voltage must not exceed 30 watts. An impulse-proof DC power supply is required, which supplies the required voltage and current of the LED lamp(s). Universal control voltage 8..230V UC, electrically isolated from the supply and switching voltage. The set brightness level remains stored when the device is switched off (memory). In the event of a power failure, the switching position and the brightness level are saved and, if necessary, switched on when the supply voltage returns. Automatic electronic overload protection and over-temperature switch-off. From week 11/14, encrypted sensors can be trained. Bidirectional radio and/or a repeater function can be switched on. The upper %lamp rotary switch can be used to set the minimum brightness (fully dimmed). In the LRN position, up to 35 radio buttons are assigned, one or more of them central control buttons. The dimming speed can be set with the lower DIM speed rotary switch. In addition to the radio control input via an internal antenna, this dimmer switch can also be locally controlled as a universal switch using a conventional universal voltage control button, which may be installed in front of it. This means that the dimming direction is changed by interrupting the control. Short control commands switch on/off. The radio buttons can be programd either as direction buttons or as universal buttons. The LED accompanies the teach-in process according to the operating instructions and indicates radio control commands during operation by briefly flashing.This text is machine translated.
Related Products
114,99 €
Conrad Electronic International
109,99 €
Conrad Electronic International
91,99 €
Conrad Electronic International
95,99 €
Conrad Electronic International
87,99 €
Conrad Electronic International
81,99 €
Conrad Electronic International
35,99 €
Conrad Electronic International
85,99 €
Conrad Electronic International
93,99 €
Conrad Electronic International
95,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.