Eltako 23100832 TDR DIN rail 8 V DC/AC, 12 V DC/AC, 24 V DC/AC, 110 V DC/AC, 230 V DC/AC
49,99 €
Product Description
1 closing contact not isolated 16 A/250 V/AC, incandescent bulbs up to 2300 W, ESL and LED-lamps up to 200 W. control voltage 230 V and/or 8..230 V UC. Switch-off pre-warning and scanner light can be attached. Stand-by-loss only 0.7 W. With ESL-optimization and multi-function. Number of built-in device for mounting on support rails DIN-EN 60715 TH35. 1 division unit = 18 mm wide, 58 mm deep. Contact switching in the zero crossing to protect the contacts and lamps. In particular, this extends the life span of energy-saving lamps. The noiseless electronics bothered not the Prioritises ndlichste ear - completely contrary to many synchronous motors with mechanical transmission.Through the use of a bi-stable relay, there are also when it is switched on, no coil power loss and no heat build-up in this way. After installing the automatic short synchronization wait before the consumer connected downstream of the power. Control-, supply and switching voltage 230 V. in addition with galvanically isolated universal control voltage 8..230 V UC. For 3- and 4-wire circuits, Resetteable, with roof floor lighting for 4-wire circuit. Automatic detection of the type of connection.Glow lamp current up to 50 mA, depending on the starting voltage of the glow lamps. Exact time adjustment 1 to 30 minutes with minute scale.Continuous light switch with the big rotary switch. After a power failure in the function setting TLZ is the lightSwitched on when the time is not yet complete. With double connections for buttons and lamp, so that either the top and bottom or bottom only can be connected. The light flickers at trains = unconnected switch-off pre-warning about 30 seconds beforeStarting time and a total of 3 times in shorter time intervals. With added scanner light can be button for longer than 1 sec. for continuous light, which is turned off automatically after 60 min or with buttons for more than 2 seconds can be switched off. Are scanner light and switch-off pre-warning, takes place after switching off the continuous light only the switch-off pre-warning. Be wholly or partially energy saving lamps ESL connected, then the switch-off pre-warning and scanner light on the right-hand side of the rotary switch. ESL Within the first second after switching on or after can switch in the tlz functions the time by up to 3 times short keys can be extended. Each keys added 1 times the set time. With multi-function: can be switched to the functions it (relay), HE (relay) and ESV (Surge switch with fall-back delay). In the function ESV correspond to the central rotary switch at pre-set times (t) the following values: 1 = 2 min, 2 = 5 min, 3 = 10 minutes, 4 = 15 minutes, 6 = 25 minutes, 8 = 35 min, 10 = 45 min, 12 = 60 min, 20 = 90 min, 30 = 120 Min. After the set delay time is automatically switched off when the manual off command not been given. Switch-off pre-warning and scanner light are also ESV can be activated. Forgetting to continuous light is switched off after 2 hours.This text is machine translated.
Eltako 23100832 TDR DIN rail 8 V DC/AC, 12 V DC/AC, 24 V DC/AC, 110 V DC/AC, 230 V DC/AC
1 closing contact not isolated 16 A/250 V/AC, incandescent bulbs up to 2300 W, ESL and LED-lamps up to 200 W. control voltage 230 V and/or 8..230 V UC. Switch-off pre-warning and scanner light can be attached. Stand-by-loss only 0.7 W. With ESL-optimization and multi-function. Number of built-in device for mounting on support rails DIN-EN 60715 TH35. 1 division unit = 18 mm wide, 58 mm deep. Contact switching in the zero crossing to protect the contacts and lamps. In particular, this extends the life span of energy-saving lamps. The noiseless electronics bothered not the Prioritises ndlichste ear - completely contrary to many synchronous motors with mechanical transmission.Through the use of a bi-stable relay, there are also when it is switched on, no coil power loss and no heat build-up in this way. After installing the automatic short synchronization wait before the consumer connected downstream of the power. Control-, supply and switching voltage 230 V. in addition with galvanically isolated universal control voltage 8..230 V UC. For 3- and 4-wire circuits, Resetteable, with roof floor lighting for 4-wire circuit. Automatic detection of the type of connection.Glow lamp current up to 50 mA, depending on the starting voltage of the glow lamps. Exact time adjustment 1 to 30 minutes with minute scale.Continuous light switch with the big rotary switch. After a power failure in the function setting TLZ is the lightSwitched on when the time is not yet complete. With double connections for buttons and lamp, so that either the top and bottom or bottom only can be connected. The light flickers at trains = unconnected switch-off pre-warning about 30 seconds beforeStarting time and a total of 3 times in shorter time intervals. With added scanner light can be button for longer than 1 sec. for continuous light, which is turned off automatically after 60 min or with buttons for more than 2 seconds can be switched off. Are scanner light and switch-off pre-warning, takes place after switching off the continuous light only the switch-off pre-warning. Be wholly or partially energy saving lamps ESL connected, then the switch-off pre-warning and scanner light on the right-hand side of the rotary switch. ESL Within the first second after switching on or after can switch in the tlz functions the time by up to 3 times short keys can be extended. Each keys added 1 times the set time. With multi-function: can be switched to the functions it (relay), HE (relay) and ESV (Surge switch with fall-back delay). In the function ESV correspond to the central rotary switch at pre-set times (t) the following values: 1 = 2 min, 2 = 5 min, 3 = 10 minutes, 4 = 15 minutes, 6 = 25 minutes, 8 = 35 min, 10 = 45 min, 12 = 60 min, 20 = 90 min, 30 = 120 Min. After the set delay time is automatically switched off when the manual off command not been given. Switch-off pre-warning and scanner light are also ESV can be activated. Forgetting to continuous light is switched off after 2 hours.This text is machine translated.
Related Products
53,99 €
Conrad Electronic International
39,99 €
Conrad Electronic International
95,99 €
Conrad Electronic International
47,99 €
Conrad Electronic International
48,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.