Product Description
Digitally adjustable multifunction timer relay with display and Bluetooth with the Eltako connect app. With 18 functions. 1 changer floating between 10A/250V AC and DX, 230V LED lamps up to 200W, incandescent lamps 2000W. With display lighting Stand-by loss only 0.1-0.3 watts. DIN-EN 60715 TH35 DIN rail mounting device. 1 division unit = 18 mm wide, 58 mm deep. With the patented Eltako-Duplex-Technology (DX) the normally potential-free contacts during switching of 230V-alternating voltage 50Hz can nevertheless switch in the zero crossing and thus the wear and tear can be drastically reduced. Simply connect the N conductor to terminal (N) and L to 15(L). This results in an additional standby loss of only 0.1 watts. Universal control voltage 12..230 V UC. Supply voltage like the control voltage. Both the function and the times are entered by pressing a button and displayed digitally on a LC display. For this purpose, only two buttons are used. When setting the time, all values can be entered within the pre-selected time frame (0.1-9.9 or 1-99 seconds, minutes or hours). The longest time is 99 hours. 600 time settings are possible. The time(s) entered will be continuously digitally displayed. Functions: Rv = back delay. AV = Response delay. AV+ = additive delay. TI = clock pulse ON. TP = timer starting with pause. IA = Impulse-controlled delay delay (e.g. automatic door opener). IF = Pulse shaper EW = switch wiper. AW = single shot trailing edge. EAW = switch on and off wiper. ARV = response and release delay. ARV+ = additive operate and release delay. ES = surge switch. SRV = Impulse switch with fall-back delay. ESV = Impulse changeover switch with off-delay and switch-off pre-warning. ER = Relay. ON = constant ON. OFF = Duration OFF. For the TI, TP, IA, EAW, ARV and ARV+ functions, a deviating second time can be entered, even with a different time frame. The time relay is set either via Bluetooth with the APP or with the MODE and SET buttons. By the 1. Press MODE or SET turns on the display light. 20 seconds after the last MODE or SET operation automatically returns to the normal display and the display light is switched off. Connect the timer to the APP: Press SET, the display shows BLE (Bluetooth) and the ID of the timer. Now the connection with the APP can be established (factory setting PIN 123123). Scan QR code on the user manual; the APP guides you through programming process. After the connection to the APP is established, BLE+ appears in the display. The MODE and SET keys are now locked. After 20 minutes of no interaction with the timer, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the APP under the entry Device PIN. Bluetooth reset (delete possibly changed PIN): The connection to the APP must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes in the display. Now press SET for 2 seconds, BLE appears in the display. If confirmed with MODE, the BLE reset is performed, the PIN is deleted and the factory setting is restored. Set the time relay with the MODE and SET buttons: Press the MODE button to select the LCD element to be changed. The respective element at the access flashes. By pressing the SET key, the element which is currently in access is changed. This can be the function, the time frame, the time T1 or the time T2 (only for TI, TP, IA, EAW, ARV and ARV+). Each entry is terminated with the button MODE. After setting the time with MODE, no element is flashing â the time relay is ready for operation. Power failure safety: The set parameters are stored in an EEPROM and are therefore available immediately after a power failure.This text is machine translated.
MFZ12DBT-UC Eltako Clock DIN rail
Digitally adjustable multifunction timer relay with display and Bluetooth with the Eltako connect app. With 18 functions. 1 changer floating between 10A/250V AC and DX, 230V LED lamps up to 200W, incandescent lamps 2000W. With display lighting Stand-by loss only 0.1-0.3 watts. DIN-EN 60715 TH35 DIN rail mounting device. 1 division unit = 18 mm wide, 58 mm deep. With the patented Eltako-Duplex-Technology (DX) the normally potential-free contacts during switching of 230V-alternating voltage 50Hz can nevertheless switch in the zero crossing and thus the wear and tear can be drastically reduced. Simply connect the N conductor to terminal (N) and L to 15(L). This results in an additional standby loss of only 0.1 watts. Universal control voltage 12..230 V UC. Supply voltage like the control voltage. Both the function and the times are entered by pressing a button and displayed digitally on a LC display. For this purpose, only two buttons are used. When setting the time, all values can be entered within the pre-selected time frame (0.1-9.9 or 1-99 seconds, minutes or hours). The longest time is 99 hours. 600 time settings are possible. The time(s) entered will be continuously digitally displayed. Functions: Rv = back delay. AV = Response delay. AV+ = additive delay. TI = clock pulse ON. TP = timer starting with pause. IA = Impulse-controlled delay delay (e.g. automatic door opener). IF = Pulse shaper EW = switch wiper. AW = single shot trailing edge. EAW = switch on and off wiper. ARV = response and release delay. ARV+ = additive operate and release delay. ES = surge switch. SRV = Impulse switch with fall-back delay. ESV = Impulse changeover switch with off-delay and switch-off pre-warning. ER = Relay. ON = constant ON. OFF = Duration OFF. For the TI, TP, IA, EAW, ARV and ARV+ functions, a deviating second time can be entered, even with a different time frame. The time relay is set either via Bluetooth with the APP or with the MODE and SET buttons. By the 1. Press MODE or SET turns on the display light. 20 seconds after the last MODE or SET operation automatically returns to the normal display and the display light is switched off. Connect the timer to the APP: Press SET, the display shows BLE (Bluetooth) and the ID of the timer. Now the connection with the APP can be established (factory setting PIN 123123). Scan QR code on the user manual; the APP guides you through programming process. After the connection to the APP is established, BLE+ appears in the display. The MODE and SET keys are now locked. After 20 minutes of no interaction with the timer, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the APP under the entry Device PIN. Bluetooth reset (delete possibly changed PIN): The connection to the APP must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes in the display. Now press SET for 2 seconds, BLE appears in the display. If confirmed with MODE, the BLE reset is performed, the PIN is deleted and the factory setting is restored. Set the time relay with the MODE and SET buttons: Press the MODE button to select the LCD element to be changed. The respective element at the access flashes. By pressing the SET key, the element which is currently in access is changed. This can be the function, the time frame, the time T1 or the time T2 (only for TI, TP, IA, EAW, ARV and ARV+). Each entry is terminated with the button MODE. After setting the time with MODE, no element is flashing â the time relay is ready for operation. Power failure safety: The set parameters are stored in an EEPROM and are therefore available immediately after a power failure.This text is machine translated.
Related Products
91,99 €
98,99 €
Conrad Electronic International
43,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.