Product Description
With this Ethernet extension can be integrated in a LAN bricks and brick lets 10BaseT/100BaseTX Ethernet is supported and the module is 1000BaseTX compatible. The extension is available in two versions: In the PoE version, it has an integrated PoE power supply, a supply of the connected modules industry standard IEEE 802.3af enables so that both via PoE injectors as well as via PoE-enabled switches can be supplied. In addition, a second version without PoE available.Since the extension of the API generated TCP/IP packets treat, it is possible directly from your smartphone, tablet or (Embedded) PC to control. The Brick daemon is no longer necessary.The Ethernet extension can be used in conjunction with a Master brick or a red brick. If other bricks are supposed to be controled, a pile of these are to be built and to the master brick or red brick plugged in. If brick lets are to be used, they can be easily to any brick in the stack can be connected (with the exception of red bricks).From programrs point of view, the use of an Ethernet Extension absolutely transparent, i.e. all bricks and brick lets can be as if they were connected directly via USB with the controlling device.The used must be a firmware version 2.1.0 or later of Master Brick have to be able to use this extension.Ethernet configurationThe Ethernet extension can be configured in two modes: DHCP or Static IP. Only in the static IP, subnet mask and gateway mode are IP must be entered.The MAC address of the Ethernet extension is not fixed and is awarded. This should be lost for any reason, the sticker on the Ethernet extension to remove.After configuration, the button Save Ethernet configuration be clicked and the master brick must be restarted.WebSocketsThe Ethernet extension supports since Master Brick Firmware Version 2.2.0 WebSockets. The Max Connections setting allows the seven sockets of the Ethernet extension as desired between normal and Web socket connections.WebSockets are on the browser version of the JavaScript Bindings used bricks and brick lets to control.AuthenticationThe Ethernet extension supports since Master Brick Firmware Version 2.2.0 authentication. This is disabled by default. In order to activate authentication must be the tick at Use Authentication is set and an authentication secret must be entered. The secret can be a maximum of 64 ASCII characters. Once the configuration is saved and the master brick restarted was authentication is active.From now on, any TCP/IP connection to the Ethernet extension first to prove that the authentication secret knows before normal communication can take place. PoE power supplyA pile of bricks and brick lets via PoE to supply can be for example a PoE injector can be used. The Ethernet extension then supplies the entire stack. Active PoE is connected via the green LED on the extension is displayed.Servos and (Step) motors connected to DC, servo or stepper bricks can not be supplied via PoE, as the PoE voltage too high for this purpose.The Ethernet extension can be used in conjunction with a step-down power supply can be operated.This text is machine translated.
TinkerForge 34 TinkerForge Suitable for (single board PCs) TinkerForge 1 pc(s)
With this Ethernet extension can be integrated in a LAN bricks and brick lets 10BaseT/100BaseTX Ethernet is supported and the module is 1000BaseTX compatible. The extension is available in two versions: In the PoE version, it has an integrated PoE power supply, a supply of the connected modules industry standard IEEE 802.3af enables so that both via PoE injectors as well as via PoE-enabled switches can be supplied. In addition, a second version without PoE available.Since the extension of the API generated TCP/IP packets treat, it is possible directly from your smartphone, tablet or (Embedded) PC to control. The Brick daemon is no longer necessary.The Ethernet extension can be used in conjunction with a Master brick or a red brick. If other bricks are supposed to be controled, a pile of these are to be built and to the master brick or red brick plugged in. If brick lets are to be used, they can be easily to any brick in the stack can be connected (with the exception of red bricks).From programrs point of view, the use of an Ethernet Extension absolutely transparent, i.e. all bricks and brick lets can be as if they were connected directly via USB with the controlling device.The used must be a firmware version 2.1.0 or later of Master Brick have to be able to use this extension.Ethernet configurationThe Ethernet extension can be configured in two modes: DHCP or Static IP. Only in the static IP, subnet mask and gateway mode are IP must be entered.The MAC address of the Ethernet extension is not fixed and is awarded. This should be lost for any reason, the sticker on the Ethernet extension to remove.After configuration, the button Save Ethernet configuration be clicked and the master brick must be restarted.WebSocketsThe Ethernet extension supports since Master Brick Firmware Version 2.2.0 WebSockets. The Max Connections setting allows the seven sockets of the Ethernet extension as desired between normal and Web socket connections.WebSockets are on the browser version of the JavaScript Bindings used bricks and brick lets to control.AuthenticationThe Ethernet extension supports since Master Brick Firmware Version 2.2.0 authentication. This is disabled by default. In order to activate authentication must be the tick at Use Authentication is set and an authentication secret must be entered. The secret can be a maximum of 64 ASCII characters. Once the configuration is saved and the master brick restarted was authentication is active.From now on, any TCP/IP connection to the Ethernet extension first to prove that the authentication secret knows before normal communication can take place. PoE power supplyA pile of bricks and brick lets via PoE to supply can be for example a PoE injector can be used. The Ethernet extension then supplies the entire stack. Active PoE is connected via the green LED on the extension is displayed.Servos and (Step) motors connected to DC, servo or stepper bricks can not be supplied via PoE, as the PoE voltage too high for this purpose.The Ethernet extension can be used in conjunction with a step-down power supply can be operated.This text is machine translated.
Related Products
20,99 €
Conrad Electronic International
11,99 €
Conrad Electronic International
57,99 €
Conrad Electronic International
30,99 €
Conrad Electronic International
30,99 €
40,99 €
Conrad Electronic International
37,99 €
Conrad Electronic International
35,99 €
Conrad Electronic International
35,99 €
Conrad Electronic International
61,99 €
Conrad Electronic International
67,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.