We currently have no offers for this products
The gas alarm GX-HS is a gas detector for various gases and warns even at a gas concentration, which is far below the life-threatening value. This surveillance system is therefore set very sensitive in accordance with its purpose. A suitable sensor must be used for each type of gas.(For activation and minimum concentration, refer to the sensor's user manual).The alarm signal is visually and acoustically attached to the device (optionally an external buzzer/piezo alarm can be connected to the device). In addition, a potential-free relay is switched, for example to switch a magnetic shut-off valve (lock gas supply line) using the relay, so that no further gas can escape at a possible leak in the gas line or in the gas thermal lift and to operate a switching input in the building control system using a second relay / fault relay.Installation manualThe warning device and the sensor may only be installed in dry interiors and must be correctly positioned depending on the gas type, in order to ensure a faultless functioning of the warning device.The installation must be carried out by a qualified specialist.Please observe the five safety rules!Top hat DIN rail mountingThe gas alarm GX-HS is installed in distributions and switching cabinets on a standard 35 mm DIN rail (DIN rail).Sensor installationDepending on the type of connected sensor, the device will detect different gases, for example Town and natural gas (methane/butane), carbon monoxide and smoke or carbon dioxide. A prescribed installation height is necessary for each sensor type, as gases have different properties and distribute themselves accordingly in the room.For cable extensions, please always follow the operating instructions of the sensor.Available compatible sensors, version 12/2022:GX-SE - for city/natural/liquefied gases, methane, butane, propane, ethanol - limits 10 - 20 % LEL - item no. 300897GX-CFC - for fluorinated hydrocarbons, refrigerants, e.g. R32, R404, R410 - limits 100 ppm to 3000 ppm - Art. No. 200901GX-DS - for carbon dioxide CO2, monitoring the room air, memory for airing - limits - 2500 ppm - item no. 200884Active sensor warning devices, operate at GX-HS to receive potential-free contacts:GX-CO2-25 - for carbon dioxide CO2, monitoring of the room air, memory for airing, piezo + LEDs + integrated test function - limits 2500 ppm - Article No. 200989GX-CO2-30 - for carbon dioxide CO2, monitoring of gas and beverage dispensing equipment, dry ice storage, piezo + LEDs + test function incorporated, IP54 - limit values 1.5 %/3 % vol. - Article No. 300315Only one GX sensor can be operated on a GX-HS.This text is machine translated.
The gas alarm GX-HS is a gas detector for various gases and warns even at a gas concentration, which is far below the life-threatening value. This surveillance system is therefore set very sensitive in accordance with its purpose. A suitable sensor must be used for each type of gas.(For activation and minimum concentration, refer to the sensor's user manual).The alarm signal is visually and acoustically attached to the device (optionally an external buzzer/piezo alarm can be connected to the device). In addition, a potential-free relay is switched, for example to switch a magnetic shut-off valve (lock gas supply line) using the relay, so that no further gas can escape at a possible leak in the gas line or in the gas thermal lift and to operate a switching input in the building control system using a second relay / fault relay.Installation manualThe warning device and the sensor may only be installed in dry interiors and must be correctly positioned depending on the gas type, in order to ensure a faultless functioning of the warning device.The installation must be carried out by a qualified specialist.Please observe the five safety rules!Top hat DIN rail mountingThe gas alarm GX-HS is installed in distributions and switching cabinets on a standard 35 mm DIN rail (DIN rail).Sensor installationDepending on the type of connected sensor, the device will detect different gases, for example Town and natural gas (methane/butane), carbon monoxide and smoke or carbon dioxide. A prescribed installation height is necessary for each sensor type, as gases have different properties and distribute themselves accordingly in the room.For cable extensions, please always follow the operating instructions of the sensor.Available compatible sensors, version 12/2022:GX-SE - for city/natural/liquefied gases, methane, butane, propane, ethanol - limits 10 - 20 % LEL - item no. 300897GX-CFC - for fluorinated hydrocarbons, refrigerants, e.g. R32, R404, R410 - limits 100 ppm to 3000 ppm - Art. No. 200901GX-DS - for carbon dioxide CO2, monitoring the room air, memory for airing - limits - 2500 ppm - item no. 200884Active sensor warning devices, operate at GX-HS to receive potential-free contacts:GX-CO2-25 - for carbon dioxide CO2, monitoring of the room air, memory for airing, piezo + LEDs + integrated test function - limits 2500 ppm - Article No. 200989GX-CO2-30 - for carbon dioxide CO2, monitoring of gas and beverage dispensing equipment, dry ice storage, piezo + LEDs + test function incorporated, IP54 - limit values 1.5 %/3 % vol. - Article No. 300315Only one GX sensor can be operated on a GX-HS.This text is machine translated.
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.