New Push Function:Each socket is designed in principle similar to a pressure switch. Press ON once. Press again. The plug snaps into the respective socket when inserted. If you press the plug again, it is ejected by spring force.Power-saving side-effect: Ejected plugs are no longer in the socket-outlet (thus avoiding unnecessary standby power consumption)Press simply instead of pullingIn the workshop, in the office and in the conference rooms the devices are often plugged in and unplugged again later. If the outlet strip is located closer to the rear of the workbench or desk and is less easily accessible, pulling the plug is always a special challenge. That's annoying. Easy to cleanMost of the time, dirt and dust accumulates in the sockets pots over the years. When cleaning plug sockets pots many people have concerns or fear to clean the pots (moisture in connection with electricity is always dangerous!) When not pressed in, the power strip forms a flat surface which can be cleaned easily. Discard all plugs - wipe over - plug in again. So fast. So simple.Flat plug with pull-out helpIf the socket on which the outlet strip is operated is located behind furniture, it can be placed, due to the flat design of the plug, close to the wall again. If the plug still needs to be pulled out of the socket, a fold-out bracket makes it easier to unplug.Clever arrangement of socketsAngled plugs can be inserted at a 90° angle to the strip. In conventional power strips the adjacent sockets can often be covered and thus cannot be used. This text is machine translated.