Photometer Pool-Lab 2.0 for professional water analysis in swimming pools and SPASWith this tester you can quickly and accurately measure the 24 most important pool water parameters.The operation of the PoolLAB is very simple.The fixed, but replaceable cell enables fast sampling. PoolLab (IP 68) can be immersed in water, but filling the cuvette with the supplied 10ml syringe is recommended. The zero adjustment is then carried out by pressing the ‘’ ZERO ‘’ button (only 1x required per measuring series).A reagent tablet is crushed in the cuvettes with the plunger and completely dissolved.Up to 3 parameters can be measured in the 3 chambers of the cell almost simultaneously and appear on the display after a short response time PoolLAB 2.0 can connect to a software and / or APP on your mobile phone via WIFI or Bluetooth. The measured values can be saved and printed out and the recommendations for dosing of water care products can be entered.PoolLAB 2.0 can measure the following key values:• PH-value 6.50 - 8.40• Chlorine (free/bound/total) 0.00 - 6.00 mg/l (ppm)• Alkalinity (acid capacity) 0 - 300 mg / l (ppm)• Cyanuric acid (stabilizer) 0 - 160 mg/l (ppm)• *Active oxygen (MPS) 0.0 - 30.0 mg/l (ppm)•* Iron LR 0.0-1.00 mg/l•* Copper 0.00-5.00 mg/l• *Phosphate ( LR) 0.00- 4.00 mg/l.• **Brom 0.0 - 13.5 mg/l (ppm)• **Chlorine dioxide 0.00 - 11.40 mg/l (ppm)• **Ozone 0.00 - 4.00 mg/l (ppm)*Requires tablets not included in the base kit, they must be ordered separately **Requires glycine tablets if chlorine is present in the measuring water. Glycine tablets are not included in the basic kit, must be ordered separatelyThis text is machine translated.