Product Description
The Edimax ES -5104 PH is a Fast Ethernet Switch with 5 RJ45 connections (4 PoE+ connections), for use in small and medium-sized networks. Depending on the setting of the 4 toggle switch on or off, the PoE-delivery distance from up to 200 m expanded and the port-based management for VLAN and QoS supported. PoE-enabled devices, such as WLAN Access Points, network cameras and IP telephones, as well as other Ethernet-enabled devices such as computers, printers, and Network Attached Storage (NAS) can be set easily using the switch connected to the network and power. With its compact dimensions and the low-noise operation, this device is ideal for the expansion of the networks at home or in small companies.Automatic detection of Power over Ethernet (PoE+)The ES -5104 PH has IEEE 802.3at Power over Ethernet (PoE+) ports, up to 30 W per port. It converts the electricity standard 100 - 240 V AC via the LAN cable to run in low-voltage electricity from 48 - 55 V DC and provides the standard IEEE 802.3at corresponding, connected network products. It automatically detects PoE and determines whether the -5104 PH device connected to the IEEE802.3at standard or 802.3af. For the case, if a PoE device is not recognized, only network data via the LAN cable. This is the setup and management of network devices such as access points and network cameras significantly easier.Extension of performance and data distanceVia the toggle switch 1 & 2 are extended operating modes. IT -5104 PH V2 acts like a standard IEEE 802.at/af PoE switch if the toggle switch off, i.e. to Off. When does the ES5104 PH V2 on a Per-Port-base with 10 Mbit/s-duplex operation, but 30-Watt-Po E-performance over a distance of up to 200 meters transfer and reaches the 100 m limit for Ethernet UTP cable. With this new function the ES -5104 PH V2 an additional solution for the 802.3at/af PoE distance extension and saves costs for Ethernet cable.Innovative port-based VLAN featuresThe ES -5104 PH V2 has port-based VLAN, meaning that the ports via the 3 ten toggle switch can be separated from each other. This can prevent multicast or broadcast storms of IPCameras are affecting each other.Hardware QoS for the priority of Video & Voice trafficVia the 4 ten toggle switch is 802.1p QoS supported. This video and voice traffic will receive the highest priority.CCTV modeWith the function CCTV, can be set via the toggle switch is the ES -5104 PH V2 ideal for monitoring networks. The CCTV mode is activated when the toggle switch set to on, and provides for a Multifunktions-Po E+ data extension, Port insulation and QoS. In the use of video surveillance systems for houses, companies or institutions, the CCTV-mode better speeds for the multicast viewing, as well as an easier installation. Are the toggle switch back to off, the IT -5104 PH V2 again immediately the normal mode of the general data transfer.An uplink connectionThe ES -5104 PH V2 has an uplink connection with a transmission rate of 100 Mbit/s, in order to ensure a fast data and video transmission. Moreover, it provides for a reliable protection of connections between the surveillance systems and external network, where the four PoE+ port up to their full potential can be used.Plug & Play, no installation requiredSimply connect Ethernet or PoE-enabled devices with the switch. Data and power are transmitted via the existing Standard-Cat-5e ethernet cable and that without additional configuration settings or cable. With the V2 one saves time and costs it -5104 PH in the setup of the network.Flexible network deployment & Energy EfficientThe ES -5104 PH PoE+ switch is a fast and effective solution for your network devices no sockets are available. The switch also supports IEEE 802.3az Energy Efficient Ethernet, in times with low data activity, the power consumption and thus the to reduce costs.Fanless, low-noise and compact designThe non-existing fan ensures a low-noise operation and the switch is therefore more compact despite of its size, which when space is limited, for example, on the desk in the office, is ideal.This text is machine translated.
EDIMAX ES-5104PH V2 Network switch 5 ports 100 MBit/s PoE
The Edimax ES -5104 PH is a Fast Ethernet Switch with 5 RJ45 connections (4 PoE+ connections), for use in small and medium-sized networks. Depending on the setting of the 4 toggle switch on or off, the PoE-delivery distance from up to 200 m expanded and the port-based management for VLAN and QoS supported. PoE-enabled devices, such as WLAN Access Points, network cameras and IP telephones, as well as other Ethernet-enabled devices such as computers, printers, and Network Attached Storage (NAS) can be set easily using the switch connected to the network and power. With its compact dimensions and the low-noise operation, this device is ideal for the expansion of the networks at home or in small companies.Automatic detection of Power over Ethernet (PoE+)The ES -5104 PH has IEEE 802.3at Power over Ethernet (PoE+) ports, up to 30 W per port. It converts the electricity standard 100 - 240 V AC via the LAN cable to run in low-voltage electricity from 48 - 55 V DC and provides the standard IEEE 802.3at corresponding, connected network products. It automatically detects PoE and determines whether the -5104 PH device connected to the IEEE802.3at standard or 802.3af. For the case, if a PoE device is not recognized, only network data via the LAN cable. This is the setup and management of network devices such as access points and network cameras significantly easier.Extension of performance and data distanceVia the toggle switch 1 & 2 are extended operating modes. IT -5104 PH V2 acts like a standard IEEE 802.at/af PoE switch if the toggle switch off, i.e. to Off. When does the ES5104 PH V2 on a Per-Port-base with 10 Mbit/s-duplex operation, but 30-Watt-Po E-performance over a distance of up to 200 meters transfer and reaches the 100 m limit for Ethernet UTP cable. With this new function the ES -5104 PH V2 an additional solution for the 802.3at/af PoE distance extension and saves costs for Ethernet cable.Innovative port-based VLAN featuresThe ES -5104 PH V2 has port-based VLAN, meaning that the ports via the 3 ten toggle switch can be separated from each other. This can prevent multicast or broadcast storms of IPCameras are affecting each other.Hardware QoS for the priority of Video & Voice trafficVia the 4 ten toggle switch is 802.1p QoS supported. This video and voice traffic will receive the highest priority.CCTV modeWith the function CCTV, can be set via the toggle switch is the ES -5104 PH V2 ideal for monitoring networks. The CCTV mode is activated when the toggle switch set to on, and provides for a Multifunktions-Po E+ data extension, Port insulation and QoS. In the use of video surveillance systems for houses, companies or institutions, the CCTV-mode better speeds for the multicast viewing, as well as an easier installation. Are the toggle switch back to off, the IT -5104 PH V2 again immediately the normal mode of the general data transfer.An uplink connectionThe ES -5104 PH V2 has an uplink connection with a transmission rate of 100 Mbit/s, in order to ensure a fast data and video transmission. Moreover, it provides for a reliable protection of connections between the surveillance systems and external network, where the four PoE+ port up to their full potential can be used.Plug & Play, no installation requiredSimply connect Ethernet or PoE-enabled devices with the switch. Data and power are transmitted via the existing Standard-Cat-5e ethernet cable and that without additional configuration settings or cable. With the V2 one saves time and costs it -5104 PH in the setup of the network.Flexible network deployment & Energy EfficientThe ES -5104 PH PoE+ switch is a fast and effective solution for your network devices no sockets are available. The switch also supports IEEE 802.3az Energy Efficient Ethernet, in times with low data activity, the power consumption and thus the to reduce costs.Fanless, low-noise and compact designThe non-existing fan ensures a low-noise operation and the switch is therefore more compact despite of its size, which when space is limited, for example, on the desk in the office, is ideal.This text is machine translated.
Related Products
499,00 €
Conrad Electronic International
13,99 €
Conrad Electronic International
159,99 €
Conrad Electronic International
95,99 €
Conrad Electronic International
73,99 €
Conrad Electronic International
21,99 €
Conrad Electronic International
93,99 €
Conrad Electronic International
63,99 €
Conrad Electronic International
119,99 €
Conrad Electronic International
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.