Product Description
3D-basics TPM Wash Solvent is a non-flammable, low-odor solvent used for cleaning and resolving unhardened resin in Stereolithography (SLA) 3D printed parts. 3D basics TPM Wash SolventTPM Wash Solvent (tripropylene glycol monomethyl) is a non-flammable, low-odor solvent used for cleaning and resolving unhardened resin in stereolithography (SLA) 3D-printed parts. TPM has a lower evaporation rate than IPA and TPM can wash approximately three times as many parts as IPA before it needs to be replaced.TPM is not currently certified for use with Formlabs biocompatible resins.TPM is compatible with the Finish Kit, Form Wash and Form Cure of Formlabs.ApplicationAlways wear gloves when handling TPM.To remove uncured resin from SLA or DLP printed parts, fill your cleaning vessel with the quantity specified by the manufacturer. To minimize waste, it is recommended that you clean the parts in advance before inserting them into the cleaning container to extend the life of your new TPM. This can be done in a separate container with eighth dirty TPM from previous cleaning cycles or low evaporation cleaners such as DPM, TPM, or PGDA. Place the finished pressure in the cleaning vessel, clean the parts for at least 5 minutes or according to the guidelines of the material manufacturer. After the cleaning cycle, wash the TPM-coated part with water, allow the model to dry and check for sticky surface, repeat if necessary until the surface is no longer sticky. If it is still sticky, replace the TPM.This text is machine translated.
Cleaning Fluid TPM Wash Solvent 5 L 320023
3D-basics TPM Wash Solvent is a non-flammable, low-odor solvent used for cleaning and resolving unhardened resin in Stereolithography (SLA) 3D printed parts. 3D basics TPM Wash SolventTPM Wash Solvent (tripropylene glycol monomethyl) is a non-flammable, low-odor solvent used for cleaning and resolving unhardened resin in stereolithography (SLA) 3D-printed parts. TPM has a lower evaporation rate than IPA and TPM can wash approximately three times as many parts as IPA before it needs to be replaced.TPM is not currently certified for use with Formlabs biocompatible resins.TPM is compatible with the Finish Kit, Form Wash and Form Cure of Formlabs.ApplicationAlways wear gloves when handling TPM.To remove uncured resin from SLA or DLP printed parts, fill your cleaning vessel with the quantity specified by the manufacturer. To minimize waste, it is recommended that you clean the parts in advance before inserting them into the cleaning container to extend the life of your new TPM. This can be done in a separate container with eighth dirty TPM from previous cleaning cycles or low evaporation cleaners such as DPM, TPM, or PGDA. Place the finished pressure in the cleaning vessel, clean the parts for at least 5 minutes or according to the guidelines of the material manufacturer. After the cleaning cycle, wash the TPM-coated part with water, allow the model to dry and check for sticky surface, repeat if necessary until the surface is no longer sticky. If it is still sticky, replace the TPM.This text is machine translated.
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.